38 found, showing page 2 of 3
Eaton Wiring Devices BP914 Circuit Tester, 90 to 600 V, Amber/Brown
PRODUCT OVERVIEW
For testing electric circuits from 90 to 600 V. Detects presence of power on either AC or DC circuits. Identifies circuit conductors.
Product Details
Color:Amber/Brown
Material:Polycarbonate
Measuring Range:90 to 600 V
Features
Detects the presence of power on either AC or DC circuits
Identifies circuit conductors
View Details
$7.99
Gardner Bender RTL-108 Test Lead, Black/Red
PRODUCT OVERVIEW
Replacement leads for Gardner Bender meters GMT-12A, GMT-18A. UL recognized. Tough ABS plastic. Flexible cords for easy use.
Product Details
Color:Black/Red
Insulation Material:ABS
Suitable for:Gardner Bender GMT-312 GMT-318 Meters
Features
Contains both red and black leads
Flexible cords for easy use
View Details
$6.49
Gardner Bender GCV-3206 Probe and Continuity Tester with Screwdriver Tip, 12 to 250 VAC/VDC, LED Dis
PRODUCT OVERVIEW
Testing for voltage to any electrical project is important for your safety. This compact multi-purpose unit makes it easy with a combination voltage probe and continuity tester built into a single unit with a convenient screwdriver tip designed for quick faceplate removal. Its compact size fits easily into a pocket or tool box for retrieval as needed. Use to test outlets, fuses, switches, electronics, extension cords, light fixtures and low voltage lighting circuits.
Product Details
Color:Red
Display Type:LED
Includes:(2) LR44 Batteries and Tester
Indication Type:Visual
Material:ABS
Measuring Functions:Voltage
Measuring Range:12 to 250 VAC/VDC
Power Source:Battery
Temperature Rating:0 to 32 deg C
Features
Tests from 12 to 250 VAC/VDC voltage on energized circuits
LED indicator glows red when voltage or continuity exists
Convenient screwdriver tip and pocket clip
View Details
$14.99
Gardner Bender BigBen Series 961 Hand Bender Head, 1/2 in Conduit, 3/4 in EMT
PRODUCT OVERVIEW
GB's BigBen aluminum hand bender has improved traditional hand benders by enlarging the hook with a 5X durability factor, increasing the foot pedal size and clearance by 40%, highlighting the markings and incorporating a dual sight-line system for bending on the floor or in the air. Includes industry standard markings to simplify the job. Made of rugged, heat-treated aluminum and backed by a lifetime warranty. Package includes bender head only. Also available with handle (Model #961H). Other head sizes available are 1/2 in (Model #960) and 1 in (Model #962). Bender handle available separately (Model #BH-75 - 3/4 in NPT x 38 in long). Includes a detailed hand bending manual which clearly illustrates various bends and how to achieve them including the mathematical formulas to complete more complicated bends.
Product Details
Bend Angle:4.74 in
Color:Silver
Conduit Size:1/2 in
Conduit Type:EMT/Rigid
E M T Size:3/4 in
Material:Aluminum
Suitable for:BH-75 Hand Bender Handle
Features
Embossed sight lines for 10 deg, 22 deg, 30 deg, 45 deg, 60 deg and 90 deg Industry-standard markings, 30 deg bend when handle is straight up
Bigger hook with a 5x durability factor
Bigger foot pedal 40% larger, more foot room allows for use with a booted foot
Bend-back channel easily corrects conduit over-bends
Vise-Mate holds conduit while cutting or reaming
Head fits handle number BH-75
View Details
$44.99
Gardner Bender BigBen Series 960 Hand Bender Head, 1/2 in EMT
PRODUCT OVERVIEW
GB's BigBen aluminum hand bender has improved traditional hand benders by enlarging the hook with a 5X durability factor, increasing the foot pedal size and clearance by 40%, highlighting the markings and incorporating a dual sight-line system for bending on the floor or in the air. Includes industry standard markings to simplify the job. Made of rugged, heat-treated aluminum and backed by a lifetime warranty. Package includes bender head only. Also available with handle (Model #960H). Other head sizes available are 1 in (Model #962) and 3/4 in (Model #961). Bender handle available separately (Model #BH-75 - 3/4 in NPT x 38 in long). Includes a detailed hand bending manual which clearly illustrates various bends and how to achieve them including the mathematical formulas to complete more complicated bends.
Product Details
Bend Angle:3.69 in
Color:Silver
Conduit Type:EMT
E M T Size:1/2 in
Material:Aluminum
Suitable for:BH-75 Hand Bender Handle
Features
Embossed sight lines for 10 deg, 22 deg, 30 deg, 45 deg, 60 deg and 90 deg Industry-standard markings, 30 deg bend when handle is straight up
Bigger hook with a 5x durability factor
Bigger foot pedal 40% larger, more foot room allows for use with a booted foot
Bend-back channel easily corrects conduit over-bends
Vise-Mate holds conduit while cutting or reaming
View Details
$29.99
Gardner Bender GS-40 Wire Stripper, 10 to 24 AWG Wire, 5 in OAL, Vinyl Grip Handle
PRODUCT OVERVIEW
This tool cuts copper and aluminum solid or stranded wire. Rotate the cam wheel adjustment to strip appropriate 10 to 24 AWG wire. Holes in the side of the jaws are intended for looping solid wire. Compact tool adjusts quickly to any of eight wire sizes.
Product Details
Handle Color:Red
Handle Type:Vinyl Grip
Jaw Material:Spring Steel
Overall Length:5 in
Wire Size:10 to 24 AWG
Wire Type:Solid Stranded
Features
Hardened spring steel provides strength and durability
Looping hole bends and loops wire for termination on screws
Vinyl grips for added comfort
GS-40 includes a spring return for easy handling
View Details
$7.99
Gardner Bender Strip-Easy Series SE-92 Wire Stripper, 8 to 22 AWG Wire, 8 to 22 AWG Stripping, 8 in
PRODUCT OVERVIEW
The Strip-Easy automatic wire stripper is an ideal choice for stripping solid or stranded wire. The spring-loaded stripper automatically removes wire insulation on 22-8 ga wires without crushing the ends. It has a comfortable, no-slip plastic handle that helps to secure a firm hand grip during use.
Product Details
Handle Color:Red
Handle Material:Plastic
Handle Type:No Slip
Overall Length:8 in
Stripping Capacity:8 to 22 AWG
Wire Size:8 to 22 AWG
Wire Type:Solid Stranded
Features
Strips wires clean with one easy squeeze
Blades cut insulation without nicking conductor
Jaws open automatically to remove wire without crushing ends
AWG size clearly marked at each cutting hole
Comfortable no-slip handles
View Details
$29.99
Gardner Bender GMT-312 Multimeter, 1 mOhm, Analog Display, Black
PRODUCT OVERVIEW
Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Pocket sized analog tester. Tests voltage, DC voltage, DC current, resistance, continuity and batteries.
Product Details
Accuracy:/-5 VAC /-4 VDC DC Current /-4 Resistance
Color:Black
Dimensions:93 mm L x 62 mm W x 32 mm H
Display Type:Analog
Includes:(1) Battery Instructions and Test Leads
I P Rating:IP20
Measuring Functions:AC Voltage Continuity DC Current DC Voltage Resistance Power Source:AA Battery
Resistance:1 mOhm
Temperature Rating:64 to 77 deg F
Features
Manual range selection includes a 0 Ohm adjustment dial
Easy to read, color-coded displays, tests VAC/VDC, DC current and
resistance
13-position rotary dial
Includes test lead input icons for correct lead placement and a set of positive and negative electrical test leads
Agency approved with fuse overload protection circuitry incorporated Replaceable test leads
250 mA fuse
View Details
$18.99
AmerTac VM1001RG6ST Coax Stripping Tool, 3-7/8 in OAL, Cushion-Grip Handle
PRODUCT OVERVIEW
AmerTac Coax Stripping Tool, Wire Type: Coaxial Cable, Cushion-Grip Handle, 3-7/8 in OAL
Product Details
Handle Type:Cushion-Grip
Overall Length:3-7/8 in
Wire Type:Coaxial Cable
Features
The Zenith coax stripping tool strips insulation from a coaxial cable
Strips insulation from coaxial cable
View Details
$18.99
Klein Tools 1005 Crimping and Cutting Tool, 10 to 22 AWG Wire, 10 to 22 AWG Cutting Capacity, 9-3/4
PRODUCT OVERVIEW
Hardened wire cutter in nose. Tapered nose design for working in confined spaces. Accommodates wire from 10 to 22 AWG. Crimps 10 to 22 AWG. Crimping die marked for insulated and non-insulated solderless terminals and connectors. Plastic-dipped, cushioned handles. Red handle, 9-3/4 in L, 0.80 lb.
Product Details
Cutting Capacity:10 to 22 AWG
Handle Color:Red
Handle Material:Plastic
Handle Type:Cushion-Grip
Overall Length:9-3/4 in
Wire Size:10 to 22 AWG
Features
Specially hardened wire cutter in nose
Tapered nose design for working in confined spaces
Crimping die marked for insulated and non-insulated solderless terminals and connectors
Plastic covered cushioned handles for comfort
View Details
$34.99
Gardner Bender EFT-50B Fish Tape, 1/8 in Tape, 50 ft L Tape, Steel Tape, Red Case
PRODUCT OVERVIEW
Designed specifically for DIY occasional use, this 50 ft tape is made of standard steel material and makes quick work of most wiring projects, pulling wire through conduit or framing.
Product Details
Case Color:Red
Dimensions:7 in Dia x 0.045 in Thick
Tape Length:50 ft
Tape Material:Steel
Tape Size:1/8 in
Features
Compact size hangs easily for storage
Hardened steel resists kinking
Four viewing ports on reel allow user to see amount of tape used
Cuts and rethreads bolts
Shatterproof reel stands up to on-the-job abuse
Form-fitting finger grips around the reel fit the hand comfortably and assist with grip during rewind
View Details
$34.99
Gardner Bender Circuit Alert Series GST-224M Wire Stripper, 12/2 to 14/2 AWG Wire, 7-1/2 in OAL, Cus
PRODUCT OVERVIEW
This patented line of tools with snap-in sensor detects AC voltage without contacting live wires.
Product Details
Handle Color:Red
Handle Type:Cushion-Grip
Includes:(2) 1.5 V Button Cell Battery
Jaw Material:Stainless Steel
Overall Length:7-1/2 in
Wire Size:12/2 to 14/2 AWG
Wire Type:Solid Stranded
Features
Audible and visual alerts indicate the presence of voltage
Cuts and strips solid and stranded wire
Ergonomic, cushioned handles for ultimate comfort and control
Double bevel cutting blades for excellent nick resistance
Dual gripping positions for traditional or forward hand positions
Easy to read stamped markings
Cuts and rethreads bolt of size 6 to 32, 8 to 32 and 10 to 32
Wire looping holes form wire to fit on screw terminals
Plier nose for gripping and pulling
Durable, drop-resistant construction
View Details
$39.99
Gardner Bender Wire Aide 79-006N Series Wire Pulling Lubricant, Yellow, 1 qt Bottle, Gel
PRODUCT OVERVIEW
Heavy cream-like paste. Slides on smoothly and clings throughout the pull. Excellent abrasion protection and cling ability, repels water to some extent. Modified wax base formula dries to a slippery film. Greaseless, non-toxic, will not stain skin, clothing or construction trim, cleans up with soap and hot water. Withstands normal temperature extremes and will not dry out in the container. Remains stable with 3 freeze-thaw cycles. Non-combustible, non-conductive and non-corrosive. Will not damage conduit or insulation. Suitable for fiber-optic wire. Yellow color. In a squeeze bottle. UL listed.
Product Details
Boiling Point:212 deg F
Color:Yellow
Compositions:Carbon Dioxide Carbon Monoxide
Container Type:Bottle
Form:Gel
Net Content:1 qt
p H Range:6.5 to 8
Vapor Density:0.9 to 1.1
Vapor Pressure:18 mmHg
Viscosity:66000 to 94000 cPs
V O C Content:0 g/L
View Details
$12.99
Gardner Bender BH-75 Conduit Bender Handle, 3/4 in, Aluminum, 38 in L
PRODUCT OVERVIEW
GB Conduit Bender Handle, 3/4 in, Aluminum, 38 in L
Product Details
Length:38 in
Material:Aluminum
Size:3/4 in
Features
Threaded to fit all benders
Fits 929, 930, 931, 910, 911 benders
Pre-threaded for easy assembly and labeled with an informative guide for efficient conduit bending
View Details
$27.99
Zenith VM1001RG6CT Coax Crimping Tool, RG6, RG59 Wire
PRODUCT OVERVIEW
Zenith Coax Crimping Tool, Wire Type: Coaxial Cable, Wire Size: RG6, RG59, Handle Color: Black
Product Details
Handle Color:Black
Wire Size:RG6 RG59
Wire Type:Coaxial Cable
View Details
$16.99
